E: Wireless Setting - Pioneer X-HM82-S Operating Instructions Manual

10
10
Follow the instructions shown in Connecting using PIN
code configuration on the right.
Connecting using PIN Input
Press NET SERVICE  SETUP. Select Network Setting 
1
WPS  PIN Input, then press ENTER.
Use / to select the access point which you want to
2
connect, then press ENTER.
Available Wireless Networks
001XXXXXX
002XXXXXX
003XXXXXX
3
Confirm the PIN code of this receiver, then press ENTER.
The PIN code of this receiver is shown on the display.
You must check this PIN code to connect to the network.
88192420
[ENTER] Start
4 Within 2 minutes after closing the PIN Code message,
input the PIN Code to the access point selected in step 2.
The connection success or failure is displayed on the
display. The PIN Code input method differs depending on
the LAN device used. For details, consult the operating
instructions accompanying your LAN device.

E: Wireless Setting

Press NET SERVICE  SETUP.
1
The Initial Setup screen is shown on the display.
Select Network Setting  Network Configuration.
2
Use / to select Wireless, then press ENTER.
3
Network Configuration
Wired
Wireless
Use / to select Auto, then press ENTER.
4
Wireless
Auto
Manual
Wireless Accessory Configuration
Web Control
If you setup manually, select Manual.
Playback with NETWORK features
Use / to select the available wireless network you
5
want to connect to.
Available Wireless Networks
001XXXXXX
002XXXXXX
003XXXXXX
Use /// to enter the Pass Phrase or WEP Key.
6
Enter Password
A
[REPEAT] Change Text
[CLEAR] Delete One Character
/: Moves the adjusting digit.
/: Changes displayed character.
REPEAT: Switches character types.
CLEAR: Deletes one character at a time.
Use / to select DHCP On, then press ENTER.
7
Select Don't Use Proxy Server.
Network Configuration
DHCP On
DHCP Off
45