Resetting This Receiver; Cautions On Use - Pioneer X-HM82-S Operating Instructions Manual

11
11
Note
• Confirm the receiver's IP address as follows:
1. Press NET SERVICE  SETUP.
2. Select System Info.
3. Confirm the IP field.
Click Network Setup  Firmware Update.
4
5
Press Start.
The firmware update prepare screen is displayed. If the
screen does not switch automatically, click Click here.
6
Browse the latest firmware on your computer (a) and
then press Upload (b).
The confirmation screen is displayed. If you continue the
firmware update, press Yes. Once the firmware update
process starts, you can't stop it. Wait until the file is
uploaded (about one minute may be required depending
on your LAN connection environment).
7 The firmware upload status screen is displayed. Press
Ok.
"The upload process finished successfully." will be shown
when the update is completed.
Unplug the the power cord from the AC outlet after the
update is completed.
Note
• This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.

Resetting this receiver

Use this procedure to reset all receiver settings to the factory
default.
Important
• Disconnect all components connected to this receiver
before the operation.
Press NET SERVICE  SETUP.
1
The Initial Setup screen is displayed on the display.
a
Use / to select Factory Reset.
2
3 Select Start.
"Reset?" screen appears. Press ENTER to reset the
system.
All the settings will be reset to the factory default next
time the receiver is turned on.
b

Cautions on use

When moving this receiver
When moving this receiver, be sure to first that there is no disc
loaded and disconnect the iPod/iPhone/iPad, USB storage
device, LAN cable or any other equipment connected to the
receiver. Then press STANDBY/ON, wait for the power
indicator on the front panel display to turn off, then unplug the
power cord. Damage may occur if the receiver is transported
or moved with a disc inserted, or when another device is
connected to the iPod/iPhone connector port, USB, LAN (10/
100) terminals, or AUDIO IN, PHONES mini-plug jacks.
Place of installation
Choose a stable place near the TV or stereo system being used
with this receiver. Do not place this receiver on top of a TV or
color monitor. Also install it away from cassette decks and
other devices easily affected by magnetic forces.
Avoid the following locations:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
Additional information
55