Connecting To Auxiliary Component; Plugging In - Pioneer X-HM82-S Operating Instructions Manual

Network cd receiver system
Hide thumbs Also See for X-HM82-S:
Table of Contents

Advertisement

2
2
Connecting using LAN cable
Internet
Router
LAN
3
LAN cable
(commercially
available)
Computer
This receiver's rear
AL
panel
ANTENNA
Connecting using wireless LAN
Internet
Wireless LAN
router
LAN
3
2
1
Computer

Connecting to auxiliary component

Modem
Connect the front panel AUDIO IN mini-plug jack to your
auxiliary playback component.
This method can be used to play music on this receiver from
iPod/iPhone/iPad that do not support use of the terminal on
the front panel of this receiver.
2
1
WAN
LAN (10/100)
If the AUDIO IN mini-plug jack is connected to auxiliary
phones jack, the volume of the receiver will be adjusted by the
WLAN
ANTENNA
volume on the playback component. If the sound is distorted
after you lower the volume of the receiver, try lowering the
volume on the auxiliary playback component.

Plugging in

Modem
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the
receiver into an AC outlet.
WAN
5 V
2.1 A
PHONES
AUDIO IN
ON
TIMER
Digital audio player, etc.
Stereo mini-plug cable
(commercially available)
5 V
2.1 A
PHONES
AUDIO IN
ON
TIMER
WLAN
AC IN
ANTENNA
Power cord
To AC outlet
This receiver's rear
panel
Connecting your equipment
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents