Getting Started; Setting The Receiver; Setting The Clock; Setting The Wake-Up Timer - Pioneer X-HM82-S Operating Instructions Manual

3
3

Getting started

Setting the receiver

When you use the receiver for the first time, the following
screens will be displayed.
Set up the following items to customize the receiver.
1 Press STANDBY/ON.
The power indicator flashes slowly. About twenty seconds
after turning on the power, the following screen appears.
About thirty seconds are required between turning the
power on and completion of startup.
When powering up for the first time
When you turn on the power to the receiver for the first time,
initial settings will be automatically performed, thus startup
will take about 1 minute.
• After the Pioneer logo is displayed, the screen will go dark.
The start up process is complete once the Pioneer logo is
displayed a second time.
Auto Power Off setup
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for the set period of time).
• Default setting: 15 min
1
Press NET SERVICE, then press SETUP on the remote
control.
The Initial Setup menu is shown on the display.
12
2 Select 'Option Setting' from Initial Setup menu.
3 Select 'Power Off Setting' from Option Setting menu.
4
Select 'Auto Power Off' from Power Off Setting menu.
Use / to specify the amount of time to allow before
5
the power is turned off (when there has been no
operation), then press ENTER.
Select 15 minutes (default setting) or 30 minutes, 60
minutes or OFF.
6 When you're finished, press RETURN.

Setting the clock

TOP
MENU
STANDBY/ON
OPEN/CLOSE
DIMMER TIMER SLEEP
INPUT
iPod/USB CD BT AUDIO SOUND
SETUP
Setting the clock allows you to use the timer.
1
Press TIMER button on the remote control.
The day of the week and time are displayed.
The first time you use the clock, you are taken to the clock
adjust mode.
2
Press ENTER button.
Use / to set the day of the week, then press ENTER.
3
Use / to select 24-hour or 12-hour display, then
4
press ENTER.
The 24-hour display will appear.
(0:00 – 23:59)
The 12-hour display will appear.
(AM 0:00 – PM 11:59)
Use / to set the hour, then press ENTER.
5
Use / to set the minute, then press ENTER to
6
confirm.
To confirm the time display:
Press TIMER button. The time display will appear for about 10
seconds.

Setting the wake-up timer

STANDBY/ON
DIMMER
iPod
VOLUME iPod/USB
CONTROL
Timer playback:
ENTER
The receiver turns on and plays the desired source (X-HM82D,
XC-HM82D and X-HM72D only: iPod/USB, CD, Internet
RETURN
Radio, Spotify, FM, DAB, Digital In, Audio In, Line 1, Line
2) (X-HM82, XC-HM82 and X-HM72 only: iPod/USB, CD,
Internet Radio, Spotify, FM, AM, Digital In, Audio In, Line
1, Line 2) at a preset time.
Before setting timer:
• Check that the clock is set to the correct time (Setting the
clock above for how to this). If it is not set, you cannot use
the timer function.
• For timer playback: Plug in USB or load discs or iPod to be
played.
TOP iPod
VOLUME
CONTROL
MENU
OPEN/CLOSE
TIMER SLEEP ENTER
INPUT
CD BT AUDIO SOUND
RETURN
SETUP