Inner Door Panel (Stainless Steel Tub Models) - GEAppliances PermaTuf GLD28**V Technical Service Manual

5. Disconnect the spring to release tension from
the door hinge.
6. Remove the 4 Phillips-head screws holding the
outer door panel to the door hinges (2 on each
side).
7. Slide the outer door panel off the door hinges.

Inner Door Panel (Stainless Steel Tub Models)

To remove the inner door panel:
1. Remove the outer door panel. (See
Disconnect
2. Disconnect the control board wiring harnesses,
3. If the installation allows, pull the dishwasher out
4. Insert 2 screwdrivers (1 on each side) thru the
5. Remove the 4 Phillips-head screws holding the
6. Slide the inner door panel off the door hinges.
– 24 –
Panel (Stainless Steel Tub Models)
(See .)
Control Board
to access the door hinges.
door hinge bracket holes and secure under the
dishwasher tub.
inner door panel to the door hinges (2 on each
side).
Outer Door
.)