Inner Door Panel (PermaTuf Tub Models)
The inner door panel on the PermaTuf tub models
must be removed to access the control board,
detergent/rinse module, control TCO, tactile switch,
door switch, pocket handle, vent, console, and lens.
To remove the inner door panel:
1. Remove the 8 Phillips-head screws from the
inner door.
2. Disconnect the 2 wires from the detergent/rinse
module.
Dishwasher Components
The outer door panel on the stainless steel tub
models must be removed to access the control
board, detergent/rinse module, control TCO, tactile
switch, door switch, vent, and lens.
To remove the outer door panel:
1. Remove the two 1/4-in. hex-head screws from
2. Remove the ten T-15 torx screws from the inner
Caution: Carefully remove the outer door from the
inner door frame.
– 17 –
Outer Door Panel (Stainless Steel Tub Models)
the bottom of the front door panel (one on each
side).
door panel.
(Continued next page)