User Manual
Software Installation
Here are the instructions on how to install the driver software for Windows Vista, 7 and 8.
Note: Do not connect the device until the Utility is completely installed.
To install the driver software:
1. Insert the Resource CD to the CD-ROM. Then double click
proper folder to start the installation. If the Utility does not open automatically, click
the Start button and then click Run. Enter d:\setup.exe where 'd' is the CD-ROM
drive.
2. Click Next. Click Install and the required driver/utility will now be installed to your PC.
3. Click Finish to exit the wizard. Installation is now complete.
Page 8 of 31
Setup.exe in the