Technical Information - Panasonic CF-17 Reference Manual

Technical Information

Network
When Adding New Software or Hardware Components
Windows NT
The network connection may be severed when entering the ECO mode and sus-
pend (hibernation) mode. Be sure to disable the [Suspend/Hibernation Timeout]
settings with the Setup Utility if you require a network environment.
When the power saving function is running, communications software may mal-
function. For example, communications may be halted if the suspend (hibernation)
mode is activated. The computer must be restarted if one of these modes is en-
tered during data communications.
Be sure that the computer enters the ECO mode or suspend (hibernation) mode
after the communications software is closed.
Some of the contents of Service Pack 5 (installed at the time of purchase) may be
overwritten. Therefore, after adding a new software or hardware component, be sure
to install (UPDATE) Service Pack 5. (See the [Readme.txt] file of Microsoft Windows
NT ® Service Pack 5.)
<Only if necessary>
In addition, if you install Service Pack 5, some files of Phoenix APM 2.0 for Windows
®
NT and Phoenix Card Executive 2.0 for Windows NT
fore, after installing Service Pack 5, also re-install Phoenix APM 2.0 for Windows NT
and Phoenix Card Executive 2.0 for Windows NT
At times you may be prompted to copy Windows NT
the copy source and select [OK]. After the re-installation procedure, insert the Win-
dows NT ® Workstation CD.
<Installing Service Pack 5>
In [Start]-[Run], input [c:\sp5\sp5i386.exe], then press [OK]. Simply follow the
on-screen instructions.
CAUTION
After reinstalling, use the Service Pack 5 CD-ROM.
®
Security Function
®
Windows NT has a security function that differs from the security function of the Setup
Utility. For detailed information, please refer to the Windows NT
®
NT System Pack.
NOTE
Set the password for secrecy and protection.
Only an account for the Administrator is created the first time the computer is
started. Please create accounts for person who are actually going to use a com-
puter.
We recommend using an NTFS file system in order to use the Windows NT
security function.
®
may be overwritten. There-
®
.
®
files. Input [c:\winnt\i386] as
®
book in the Windows
34
®
®