Seat Runner Positions - Suffolk SS100 Build Manual

SS100 Build Manual (Export Edition) Rev 10 November 2013
Figure 7 – Seat Runner Positions
Initial drilling for right hand inner seat runner before floorboards fitted, mirror image for left hand inner runner.
A (seat belt clip mount) to B variable depending on height of driver 150mm – 190mm.
B to C always 330mm (length between seat runner mount holes).
B and C should be approx. 10mm off main chassis rail.
A
B
C
Positions for inner runner if floorboards already fitted and for positioning outer runner.
Page 82