Removing The Cabinet - Whirlpool MH3184XPB Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Remove the microwave oven from its
mounting location (see page 2-4 for the
procedure and do reverse procedure).
3. Remove front air vent by pulling forward
at top of air vent and remove the air vent
from the oven.
Front Air Vent
4. Remove the screw from the top vent
cover. Push the vent towards the back,
unhook it, and remove the vent from the
top of the cabinet.
Unhook Top Vent Cover
Vent Cover Screw

REMOVING THE CABINET

4-4
5. Remove the five flat-head screws from
the top of the cabinet.
5 Top Cabinet Screws
6. Remove the following screws from the
cabinet:
a) One right side screw.
b) Eight rear screws.
c) Six bottom side screws.
Right Cabinet Screw
Rear Cabinet Screw
3 Bottom Cabinet Screws (each side)
7. Pull the cabinet back so that the tabs on the
front sides disengage from the front panel,
and remove the cabinet from the oven.
(1 of 8)
Remove
Cabinet