Whirlpool MH3184XPB Service Manual page 19

For Roof Venting Installation Only
1. Insert damper assembly through the
cabinet cutout so that the long tab of the
damper assembly slides under the raised
tabs of the damper plate. Then secure
with sheet metal screw.
NOTE: The screw cannot be installed if the
damper assembly is not positioned as shown.
A B
D E
A. Raised tabs
B. Damper assembly
C. Sheet metal screw
D. Upper cabinet cutout
E. Long tab
F. Damper plate
2. Connect vent to damper assembly.
A. Vent
B. Damper assembly (under vent)
C
F
A B
ACCESSORIES
Filler Panel Kits are available from your
dealer to use when installing this microwave
oven in a 36˝ (91.4 cm) or 42˝ (106.7 cm) wide
opening. The filler panels come in pairs. Each
panel is 3˝ (7.6 cm) wide.
Filler Panel Kit Number
See your authorized dealer or service center
for details.
2-6
A
A. Filler panels
8171336 White
8171337 Black
8171338 Biscuit
8171339 Stainless Steel
99403 Almond