Whirlpool MH3184XPB Service Manual page 18

3. Using 2 or more people, lift microwave
oven and hang it on support tabs at the
bottom of mounting plate.
NOTE: To avoid damage to the microwave
oven, do not grip or use the door or door
handle while the microwave oven is being
handled.
A. Mounting plate
B. Support tabs
4. With front of microwave oven still tilted,
thread power supply cord through the
power supply cord hole in the bottom of
the upper cabinet.
5. Rotate the microwave oven up toward
upper cabinet.
NOTE: If venting through the wall, make sure
the damper assembly fits easily into the vent
in the wall cutout.
6. Push the microwave oven against mount-
ing plate and hold in place.
NOTE: If microwave oven does not need to
be adjusted, skip steps 7-9.
7. If adjustment is required, rotate the
microwave oven downward. Using 2 or
more people, lift microwave oven off of
mounting plate, and set aside on a pro-
tected surface.
8. Loosen mounting plate screws. Adjust
mounting plate and retighten screws.
9. Repeat steps 3-6.
10. With the microwave oven centered, and
with at least one person holding it in
A
place, insert bolts through upper cabinet
into microwave oven. Tighten bolts until
there is no gap between upper cabinet
B
and microwave oven.
NOTES:
• Some upper cabinets may require bolts
longer or shorter than 3˝ (7.6 cm). Longer
or shorter bolts are available at most hard-
ware stores.
• Overtightening bolts may warp the top
of the microwave oven. To avoid warp-
ing, wood filler blocks may be added. The
blocks must be the same thickness as the
space between the upper cabinet bottom
and the microwave oven.
A
2-5
A. Bolts