Whirlpool MH3184XPB Service Manual page 36

6. To remove the AC line filter:
a) Discharge the AC line filter by touch-
ing the leads of a 20,000 Ω resistor
from each of the filter leads to chassis
ground.
b) Disconnect the wire connectors from
the filter terminals.
c) Remove the nut and washer from the
bottom of the AC line filter and remove
the filter.
1-BK
5-BRN
4-GN/YL
AC Line Filter
Nut and Washer
2-WH
3-BU
4-13
7. To remove the power supply cord:
a) Discharge the AC line filter by touching
the leads of a 20,000 Ω resistor from
each of the filter leads to the chassis
ground.
b) Disconnect the black and white wire
power supply cord connectors from
filter terminals 1 and 2.
c) Remove the screw from the green
(ground) power supply cord wire.
d) Slide the power supply cord off the right
front air duct and remove the cord.
Power Supply Cord
1-BK 2-WH
GN (GND)