Whirlpool MH3184XPB Service Manual page 38

10. To remove the electronic control board:
a) Lift the locking arm on ribbon cable
connector P5 and pull the cable out of
the connector.
b) Remove the four screws from the elec-
tronic control board.
c) Release the two locking tabs and re-
move the electronic control board from
the panel.
Locking Arm
Locking Tab
Control Board
Locking Tab
4 Screws
Electronic
11. To remove the touch control assembly:
a) Remove the electronic control board
(see step 10).
b) Release the two locking tabs and remove
the metal shield from the control panel.
NOTE: The control panel and the touch
panel are replaced as one assembly.
Locking Tabs
Metal Shield
Touch Panel Assembly
4-15