Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
STIRRER MOTOR
Refer to page 4-9 for the procedure for access-
ing the stirrer motor.
1.
Unplug microwave oven or disconnect
power.
2.
Disconnect the stirrer motor wires from
the motor terminals.
3.
Set the ohmmeter to the R x 1K scale.
4.
Touch the ohmmeter test leads to the
motor terminals. The meter should indi-
cate between 2700 and 4200 Ω.
WARNING
Electrical Shock Hazard
MOTOR CAPACITOR
Refer to page 4-12 for the procedure for ac-
cessing the motor capacitor.
1.
Unplug microwave oven or disconnect
power.
2.
Discharge the capacitor by touching the
leads of a 20,000 Ω resistor from each
of the capacitor leads to the chassis
ground.
3.
Disconnect the motor capacitor wires from
the capacitor terminals.
4.
Set the ohmmeter to the R x 1 scale.
5.
Touch the ohmmeter test leads to the ca-
pacitor terminals. The meter should indi-
cate several ohms and gradually return
to infinity.
5-3