Removing The Microwave Oven Cabinet - Whirlpool GM8155XJQ Job Aid

REMOVING THE MICROWAVE OVEN CABINET

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
microwave oven.
2. Open the microwave oven door and re-
move the glass turntable and roller as-
sembly from inside the oven cavity, then
close the door.
Turntable & Roller
Assembly
3. Remove the five rear flange screws and
the two right side screws from the micro-
wave oven cabinet. NOTE: The two bot-
tom flange screws are T-20 tamper-resis-
tant torx screws.
Side
Screws
4. Pull the cabinet back, unhook it from the
sides and top of the front panel, and re-
move the cabinet.
Unhook From
Front Panel
2-2
Top Screw (1 of 3)
Two T-20 Tamper
Resistant Torx Screws
Cabinet Side Hook