Installing An Ssd Carrier - Dell PowerEdge FC430 Owner's Manual

Figure 23. Removing and installing an SSD
1. release button
3. SSD carrier handle
Next steps
1. If you are removing an SSD permanently, install the SSD blank. If you are installing a new SSD, see
Installing an SSD carrier.
2. Follow the procedure listed in
Related Links

Installing an SSD carrier

Installing an SSD carrier
Prerequisites
CAUTION: When a replacement hot swappable SSD is installed and the sled is powered on, the
SSD automatically begins to rebuild. Make absolutely sure that the replacement SSD is blank or
contains data that you wish to have over-written. Any data on the replacement SSD is
immediately lost after the SSD is installed.
NOTE: You must remove an SSD to upgrade an SSD or replace a faulty SSD.
1. Ensure that you read the
2. Remove the SSD blank.
3. Install the SSD in the SSD carrier.
NOTE: All operating systems do not support hot swappable drive installation. See the
documentation supplied with your operating system.
72
After working inside your
Safety instructions.
2. SSD in the carrier
system.