Maintenance And Service; Detector Type Encoding - Bosch AVENAR FAP-425 Operation Manual

30 en | Maintenance and Service
7

Maintenance and Service

In Germany, maintenance work and inspection work on security systems are governed by the
regulations of DIN VDE 0833; these regulations stipulate reference to the manufacturer's
instructions for maintenance intervals.
–
–
Testing
Check of the LED display
Visual check of the mounting
Visual check for damage
Check the monitoring range has not
been restricted, for instance by
shelves or similar installations.
Triggering with hot air
Triggering with Test Aerosol
Triggering with CO Testing gas
–
–
7.1

Detector Type Encoding

With the exception of the FAP-425-O-R and FAP-425-O, all detectors are fitted with a colored
ring around the central individual display to identify the detector type.
2014.11 | 1.1 | F.01U.283.550
Maintenance and inspection work should be carried out regularly and by trained
personnel.
BOSCH ST recommends carrying out a functional and visual inspection at least once a
year.
Detector Type
FAP-425-DO-R,
FAP-425-O-R,
FAP-425-O
X
X
X
X
-
X
-
With the FAP-425-DOTC-R, the gas sensor has a life cycle of max. 6 years. Once the gas
sensor has been switched off, this detector continues to function as a DOT or DO
detector and is displayed on the panel with "EMERGENCY OPERATION".
This is why multisensor detectors with C sensors need to be exchanged every 5-6
years.
Optical fire detectors should, depending on the environmental conditions, be cleaned and
exchanged regularly.
In especially dusty environments, cleaning and exchange may be necessary earlier.
Every detector has a Chamber Maid Plug
(cleaning opening with a plug) for blowing out
the optical chamber with compressed air (not
required for the Heat Detector).
FAH-425-T-R
X
X
X
X
X
-
-
Operation Guide
AVENAR detector 4000
FAP-425-DOT- FAP-425-DOTC-R
R,
FAP-425-OT-R,
FAP-425-OT
X X
X X
X X
X X
X X
X X
- X
Bosch Sicherheitssysteme GmbH