Product Description - Bosch AVENAR FAP-425 Operation Manual

4 en | Product Description
1

Product Description

AVENAR detector 4000 combines standard detection procedures such as scattered light and
temperature measurement with gas measuring technology at the highest configuration level.
This method uses intelligent evaluation electronics (Intelligent Signal Processing - ISP) to
evaluate the signals from the smoke, thermal and gas sensor. Thus, immunity against false
alarms is increased significantly and detection time is reduced in comparison to the fire
detectors available on the market today.
Thanks to the combined information collected by the multi-sensor detectors, they can be used
in environments where simple smoke detectors cannot be employed.
AVENAR detector 4000 is suitable for surface and flush mounting and includes separate
mounting points for dropped ceiling and concealed sockets.
AVENAR detector 4000 is available in different versions of single-sensor and multi-sensor
detectors.
Identifier
FAP-425-O-R
FAP-425-OT-R
FAP-425-O
FAP-425-OT
FAH-425-T-R
FAP-425-DO-R
FAP-425-DOT-R
FAP-425-DOTC-R
2014.11 | 1.1 | F.01U.283.550
Description
Optical smoke detector,
automatic and manual address
setting
Combined optical and thermal
smoke detector, automatic and
manual address setting
Optical smoke detector,
automatic address setting only
Combined optical and thermal
smoke detector, automatic
address setting only
Thermal detector, automatic and
manual address setting
Dual-optical smoke detector,
automatic and manual address
setting
Combined dual-optical and
thermal smoke detector,
automatic and manual address
setting
Combined dual-optical, thermal
and chemical smoke detector,
automatic and manual address
setting
Operation Guide
AVENAR detector 4000
Material no. Category
F.01U.280.244 Single sensor
F.01U.280.245 Multi-sensor
F.01U.279.893 Single sensor
F.01U.279.987 Multi-sensor
F.01U.280.243 Single sensor
F.01U.279.988 Double sensor
F.01U.279.989 Multi-sensor
F.01U.280.451 Multi-sensor
Bosch Sicherheitssysteme GmbH