Oce CS665 Pro Copy Operations page 375

Application functions
8
Press [Start] on the control panel.
The following screen will be displayed to indicate that the machine is now storing the image data in
HDD.
When completed, the Image Store/Recall Screen will be restored.
9
Select the desired overlaying image data.
– Touch the desired image data key to highlight it, then touch [OK].
The Stamp/Image Overlay Screen will be restored.
10
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Stamp/Image Overlay function with the current setting remained, touch [Function
Off].
11
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Stamp/Overlay] key displayed under the
[Application] key.
This key can also be used to display the Application Screen for making setting change.
The [Separate Scan] key on the Copy Screen also appears highlighted to show that the Separate Scan
mode is automatically selected.
12
Position the original to be overlaid.
– Position the original either in the ADF or on the original glass.
13
Press [Start] to scan.
– Repeat steps 12 and 13 for all originals.
14
Touch [Separate Scan] to exit the Separate Scan mode.
15
Enter the desired print quantity from the control panel keypad, then press [Start].
The machine will start printing when ready for output.
CS665 Pro
11
11-71