CARTON INVENTORY
NOT SHOWN: Documentation packet and hardware bag
Pull-to-Open Bracket
Standard Control Box
with 2 Batteries
Gate Bracket
Gate Operator
HARDWARE INVENTORY
NOTE: Hardware quantities shown below are for LA412DC. Quantities are doubled for LA412DCS.
Flat Washer 5/16" (1)
Hex Nut 5/16"-18 (1)
Lock Washer 5/16" (1)
Hex Nut 3/8"-16 (3)
OPTIONAL ACCESSORIES (ORDERED SEPARATELY)
Large Metal Control Box for Solar Applications (Model
XLSOLARCONTU)
Ideal for installations that require additional room in the control box
(batteries not included). Requires two 33AH batteries, battery tray, and
solar battery harness (refer to accessories).
Push-to-Open Bracket (Model 50-19503)
If your application requires the gate to be pushed open, a push-to-open
bracket is required (refer to accessories).
INTRODUCTION
Wire Nuts (6)
12V 10W Solar Panel
Model SOLPNL10W12V (1)
Cable Ties (4)
Warning Signs (2)
Keylock Cap
Hex Bolt 5/16"-18 x 1-1/2" (1)
Carriage Bolt 3/8" x 5-15/16" (2)
Pull-to-Open Bracket
Post Bracket
Gate Operator
Hex Bolt 3/8"-16 x 1-1/2" (1)
5
LA412DCS ONLY
Watertight Connector (2)
Gate Bracket
Junction Box
LiftMaster Monitored Retro-Reflective Photoelectric Sensor
Key (2)
Pin (2)
Hairpin Clip (2)
Post Bracket
Connector
Extension Cable
Flat Washer 3/8" (3)
Lock Washer 3/8" (3)