Furuno TZTL12F Installation Manual page 42

3. HOW TO SET UP THE EQUIPMENT
[GRAPHIC INSTRUMENT SETUP] - [Propulsion Engine] or [Other Engine]
Menu Item
[Max. RPM]
[Red Zone Oil Pressure]
Max. Oil Pressure
Min. Temperature
[Red Zone Temperature]
Menu Item
Reset Instrument Pages
Reset Default Settings
[Initial Setup] menu - [ENGINE & TANK SETUP]
Menu Item
[Nickname]
[Used For Propulsion]
[Reset]
3-8
Description
Set the maximum rpm of your engine to
show on the RPM display.
Set the starting value for the red zone area
of the oil pressure meter.
Set the maximum oil pressure of your
engine.
Set the minimum temperature for your
engine.
Set the starting value for the red zone area
of the engine temperature indicator.
Description
Resets all instrument pages to default.
Resets the [Graphic Instrument Setup]
menu items to default.
Fuel
Fuel2
Fuel3
Fuel4
Description
Change the nickname for the engine or tank.
Select which engine/tank is used to
calculate the distance which may be
traveled using the remaining fuel. [ON] uses
the engine/tank for calculations, [OFF]
ignores the engine/tank.
Resets the engine/tank details to default.
Options (setting range)
1 (rpm) to 20,000 (rpm)
0 (psi) to 59 (psi)
60 (psi) to 144 (psi)
0.00°C to 99.00°C
0.01°C to 999.00°C
Options (setting range)
[OK], [Cancel]
[OK], [Cancel]
Options (setting range)
[ON], [OFF]