System Configuration - Furuno TZTL12F Installation Manual

SYSTEM CONFIGURATION

RADOME TYPE RADAR SENSORS
DRS2D/DRS4D
POWER
SUPPLY
1
UNIT*
PSU-017
12-24 VDC
AIS Transponder
SC-30
GP-330B
FI-50/70
NAVpilot-700
IF-NMEA2K1/2
Remote Controller
MCU-002
or
SD Card Unit
SDU-001
Environmental category
Radar antenna: Exposed to the weather
All other units: Protected from the weather
1
* Radar sensor other than the DRS4DL requires a power supply unit.
2
* FUSION Electronics MS-700 series only (as of 12/2014).
3
* Max. 4 NavNet TZtouch2 units (Connected via Ethernet hub).
This unit has a built-in GPS antenna and sounder.
Note: When connecting an external monitor to the multi function display, use a monitor whose
aspect ratio is the same as that of the multi function display (16:9). The pictures may be stretched
or shrunk with a different aspect ratio. Output to an HPD (Hot Plug Detect) monitor is not possible.
ii
DRS4DL
(Available in Spring 2015)
OR
12-24 VDC
12-24 VDC
HUB -101
FI-5002
Multi Function Display* Multi Function Display*
CCD Camera
CCD Camera
Transducer
OPEN-TYPE RADAR SENSOR
DRS4A/DRS6A/DRS12A/DRS25A
OR
POWER SUPPLY UNIT*
PSU-012/PSU-013
Echo Sounder
(BBDS1, DFF series)
FA-30/50
FAX-30
FUSION-Link Equipment*
3 3
TZTL12F TZTL12F
Wide Monitor
or or
TZTL15F TZTL15F
Event SW
External Buzzer
Operator Fitness
12/24 VDC
Power input for NMEA2000
NMEA0183 out
2