Whole Home Dvr; Controlling Live Tv - Cisco Hawaiian Telcom Manual

Using Your Hawaiian Telcom TV DVR

Whole Home DVR

Whole Home DVR puts you in control. Record, pause and replay your favorite shows
at the touch of a button. Watch what you want, when you want.
Imagine watching the first half of a recorded show in your living room, then moving
to your bedroom to view the rest. Whole Home DVR gives you the ability to
schedule and view recorded shows from any TV in your home, and then watch the
same recording on up to 8 TVs at the same time. And because each TV has
separate controls, you can pause, play or rewind from anywhere. All you'll need is
one DVR and Set Top Boxes for the remaining TVs.
Resuming a Recorded Program on a Different TV
1. Press STOP button to pause the recorded show you are watching.
2. Go to another TV and turn on the Set Top Box.
3. Press DVR
4. Use UP/DOWN arrows to select the same show and press the OK
5. Select Resume Play and press the OK to start viewing the recording from where
you left off.

Controlling Live TV

When you're watching a show, your Whole Home DVR will save it for up to 60 minutes,
so you can pause, rewind and fast-forward whenever you like on the TV you are
currently viewing. Once you've paused live TV, the status bar will show you where you
are in the program and how much has been temporarily saved. If you pause for longer
than 60 minutes, the program will automatically start playing from the point where you
paused it. All temporarily saved live TV will be deleted once you change the channel
or turn your TV off.
If you'd like to save a show or resume viewing on another TV, be sure to record it.
1. Press PAUSE button.
2. Press PLAY button to resume.
3. Use REWIND/FAST FORWARD to navigate back and forward in a program.