Cisco Hawaiian Telcom Manual page 5

Pairing Your Remote
1. While the device you want to pair is on, press and hold the Setup button on
your remote until the LED light blinks twice.
2. Press a mode button:

The DVD button can be paired with your DVD player

The AUDIO button can be paired with your audio system

The TV button can be paired with your TV
3. Press and hold the OK button.

Release button when device you are trying to pair turns off.
These instructions can also be found on the back of your remote. If your device cannot be
paired using the method above, try the alternate methods below:
1. While the device you want to pair is on, press and hold the Setup button on your
remote until the LED light blinks twice.
2. Press a mode button:

The DVD button can be paired with your DVD player

The AUDIO button can be paired with your audio system

The TV button can be paired with your TV
3. Find the brand from the charts below and note the DIGIT key assigned to your
brand. Press and hold down the DIGIT key for your device/brand.
4. Release button when device you are trying to pair turns off.
Digit Brand
1 Insignia / Dynex
2 LG / Zenith
3 Mitsubishi
4 Panasonic
5 Philips / Magnavox
6 Samsung
7 Sharp
8 Sony
9 Toshiba
0 Vizio
5