Wlan Configuration; Wi-Fi Port Leds - B&B Electronics SPECTRE Configuration Manual

B&B Electronics, Inc.

3.7. WLAN Configuration

The Wi-Fi LAN and DHCP server page is displayed by selecting "WLAN" in the configuration
section.
Item Description
Enable WLAN If this item is checked, Wi-Fi LAN is enabled.
interface
IP Address Fixed IP address of Wi-Fi network interface.
Subnet Mask of Wi-Fi network interface.
Subnet mask
Bridged
Enable dynamic
If this option is checked, dynamic DHCP server is enabled.
DHCP leases
IP Pool Start Start IP addresses space.
IP Pool End End IP addresses space
Lease Time Time in seconds that the IP Address is available to the client

3.8. Wi-Fi Port LEDs

LED port indicator
Green LED
Yellow LED

No - Bridged mode is not allowed. WLAN network is not connected
with LAN router.

Yes - Bridged mode is allowed. WLAN network is connected with
one or more LAN network in router. In this case, the setting of most
items in this table is ignored. Instead, it takes setting of selected
network interface (LAN).
Table 67: WLAN Parameter
Fig. 81: WLAN Configuration
Wi-Fi port is powered on.
Permanently off.
Table 68: Wi-Fi LED State Indication
90
SPECTRE Configuration Manual
710-10001-02 Rev. 3.0
www.bb-elec.com
www.bb-europe.com