B&B Electronics SPECTRE Configuration Manual page 57

B&B Electronics, Inc.
Every monitor value is uniquely identified by a number identifier OID (Object Identifier).
For the binary input and output the following range of OIDs is used:
OID
.1.3.6.1.4.1.30140.2.3.1.0
.1.3.6.1.4.1.30140.2.3.2.0
For the expansion port CNT, the following range of OID is used:
OID
.1.3.6.1.4.1.30140.2.1.1.0
.1.3.6.1.4.1.30140.2.1.2.0
.1.3.6.1.4.1.30140.2.1.3.0
.1.3.6.1.4.1.30140.2.1.4.0
.1.3.6.1.4.1.30140.2.1.5.0
.1.3.6.1.4.1.30140.2.1.6.0
.1.3.6.1.4.1.30140.2.1.7.0
.1.3.6.1.4.1.30140.2.1.8.0
.1.3.6.1.4.1.30140.2.1.9.0
Description
Binary input BIN0 (values 0,1)
Binary output OUT0 (values 0,1)
Table 43: Object identifier for binary input and output
Description
Analogy input AN1 (range 0-4095)
Analogy input AN2 (range 0-4095)
Counter input CNT1 (range 0-4294967295)
Counter input CNT2 (range 0-4294967295)
Binary input BIN1 (values 0,1)
Binary input BIN2 (values 0,1)
Binary input BIN3 (values 0,1)
Binary input BIN4 (values 0,1)
Binary output OUT1 (values 0,1)
Table 44: Object identifier for CNT port
57
SPECTRE Configuration Manual
710-10001-02 Rev. 3.0
www.bb-elec.com
www.bb-europe.com