Router Configuration Over Telnet - B&B Electronics SPECTRE Configuration Manual

B&B Electronics, Inc.

2. Router Configuration over Telnet

Monitoring of status, configuration and administration of the router can be performed over
the Telnet interface. The default IP address of the modem is 192.168.1.1. Configuration may be
performed only by the user "root" with initial password "root".
The following commands may be used to configure the router over Telnet:
Command Description
cat display file
cp copy a file
date show/change system time
df Display information about file system
dmesg kernel diagnostic messages
echo string write
email Email send
free Display information about available memory
gsmat Send an AT commend
gsminfo Display information about signal quality
gsmsms SMS send
hwclock display/change time in RTC
ifconfig display/change interface configuration
io reading/writing input/output pins
ip display/change route table
iptables display/change NetFilter rules
kill Kill a process
killall Kill all processes
ln link create
ls dump directory contents
mkdir create directory
mv Move file
ntpdate synchronize system time with NTP server
passwd password change
ping ICMP ping
ps display process information
pwd display directory contents
reboot Reboot
rm file delete
rmdir directory delete
route display/change route table
service start/stop a service
sleep pause number of seconds
slog display system log
tail display file end
tcpdump monitoring of network
touch file create/change time stamp
vi text editor
Table 61: Telnet commands
82
SPECTRE Configuration Manual
710-10001-02 Rev. 3.0
www.bb-elec.com
www.bb-europe.com