Table of Contents
Advertisement
B&B Electronics, Inc.
3. Wi-Fi Configuration
3.1. Wi-Fi Access Point
The SPECTRE 3G-W and LTE-W routers can provide wireless access to the network using a
built-in 802.11bgn Wi-Fi module. Support for the Wi-Fi module is provided by a User Software
module which is pre-loaded into the SPECTRE Wi-Fi router at the factory. Only access point
functionality is provided by the router.
Select the WiFi user module to view the Wi-Fi AP status and configuration. This link is located
on the User Modules customization web page. The link to "Wi-Fi AP" information is in the
"Status" section.
Item
hostapd state dump
num_sta
num_sta_non_erp
num_sta_no_short_slot_time
num_sta_no_short_preamble Number of associated stations, that do not support Short
Data about connected clients is displayed as well.
Item
STA
AID
Description
Time stamp of actual WiFi status.
Number of associated stations.
Number of associated Non-ERP stations (i.e., stations using
802.11b in 802.11g BSS)
Number of associated stations, that do not support Short Slot
Time
Preamble.
Table 62: Wi-Fi AP State
Description
MAC address of associated station.
STA's unique AID (1 .. 2007) or 0 if not yet assigned.
Table 63: Wi-Fi Client State
Fig. 75: Wi-Fi AP Status
83
SPECTRE Configuration Manual
710-10001-02 Rev. 3.0
www.bb-elec.com
www.bb-europe.com
Advertisement
Table of Contents
