Adjusting The Contrast And Brightness - Sony UP-D898MD Instructions For Use Manual

Adjusting the Contrast and
Brightness
You can adjust the contrast and brightness of the unit
using the CONTRAST control and BRIGHT control.
To adjust the contrast
You can adjust the contrast of printouts using the
CONTRAST control.
To make the contrast stronger: Turn the CONTRAST
control clockwise. Maximum is 64.
To make the contrast weaker: Turn the CONTRAST
control counterclockwise. Minimum is –64.
Note
The contrast adjusting function is equivalent to "Light"
of the density control provided with the printer driver.
The value adjusted by using this CONTRAST control is
added to the value already set as "Light."
To adjust the brightness
You can adjust the brightness of printouts using the
BRIGHT control.
To make the image brighter: Turn the BRIGHT
control clockwise. Maximum is 64.
To make the image darker: Turn the BRIGHT control
counterclockwise. Minimum is –64.
To lock control
You can lock the CONTRAST control and BRIGHT
control to prevent accidentally changing the setting by
turning the controls.
To lock: Push and hold the menu lever for about three
seconds. "LOCK" is displayed on the LCD, and the
value does not change even when the control is turned.
To unlock: Push and hold the menu lever again.
"UNLOCK" is displayed on the LCD, and the lock is
canceled.
22
Printing