Sony UP-D898MD Instructions For Use Manual page 17

Item Function
CONFIG. Displays settings for
operation.
SERIAL.N Displays serial numbers of
the product.
a) The printing direction is as follows.
When "BACW:OFF" is selected
Settings
-AUT.LCK Select whether to lock BRIGHT control and CONTRAST control
automatically.
ALCK:ON: Always lock automatically. Unlock by pushing and holding
the menu lever for three seconds on STANDBY. The controls are locked
after ten seconds of no operation.
[ALCK:OFF]: Does not lock automatically. Lock/unlock the controls by
pushing and holding the menu lever for three seconds.
-BEEP Select whether the operation tone sounds. Error tones sound regardless of
the setting.
BEEP:OFF: The operation tone does not sound.
[BEEP:ON]: The operation tone sounds.
-BLANK Adjust the blank space length.
BLANK:L: Lengthens the blank space.
[BLANK:S]: Shortens the blank space.
Adjust the length of the top blank space (BACW:OFF) or the bottom
blank space (BACW:ON).
-FEED To select the paper feed length to be used after printing.
[FEED:ON]: Feeds extra blank paper between prints.
FEED:OFF: Feeds less paper between prints to conserve paper, or when
printing multiple pictures on the same sheet without cutting.
More pictures can be printed on one roll when there is only a little space
between printed pictures. Feed the desired length of the paper to leave a
margin, using the FEED button before cutting the paper.
-RESET Resets the menu items to the default setting (initialization).
[RESET:OK]: Resets the settings to the default.
-PP.TYPE Select paper to use.
[P.TYPE:HG]: Use UPP-110HG.
P.TYPE:HD: Use UPP-110HD.
P.TYPE:S: Use UPP-110S.
-LOAD Loads the registered menu settings.
LOAD:3: Loads the "SAVE:3" settings registered using the SAVE menu
item.
LOAD:2: Loads the "SAVE:2" settings registered using the SAVE menu
item.
[LOAD:1]: Loads the "SAVE:1" settings registered using the SAVE menu
item.
-SAVE Register up to three settings.
SAVE:3: Registers the menu settings as No. 3.
SAVE:2: Registers the menu settings as No. 2.
[SAVE:1]: Registers the menu settings as No. 1.
-SPEED Select the printing speed.
When you use the UPP-110HD paper, you cannot select HI (high speed
printing).
[HI]: Prints at high speed.
NOR: Prints at the normal speed.
When "BACW:ON" is selected
Adjustments and Settings Using the Menu
17