Table of Contents
Advertisement
1
Press the power ON/OFF switch to on.
When paper is not loaded yet, the back light on the
LCD lights in orange and the message "EMPTY" is
displayed.
2
Press the OPEN button to open the door panel.
3
Remove the label from the leading edge of the
paper, pull out about 15 - 20 cm (6 - 8 in) of the
paper, and then set the paper roll in the paper tray.
Note
When installing/removing the paper to/from the
paper tray, be careful not to drop the paper or put
the paper on desk, etc., with the surface of the paper
facing downward.
Remove label and pull
out 15 - 20 cm (6 - 8 in).
Load the paper with the printing side (heat
sensitive side) up. Printing is not possible if the
paper is reversed.
Make sure that the paper is set
straight.
13
Loading Paper
Hide quick links:
Advertisement
Table of Contents
