Table of Contents
Advertisement
6
Click the [Options...] button to open the dialog box. Several functions are not
supported by some plotter models (grayed out options are not supported).
Folder Options
Program: Select Folder Bypass or Programs 1 through 20.
Margin: Select Use program setting or Always off.
Output Bin: Select Don't care, Fanfold output, or Bin 1 through Bin 13.
Manual output: Select Yes or No to use or not to use the function.
7
Click [Image Correction] button to open the dialog box.
A correction graph indicates how an output picture image is corrected. By
correcting the graph, you can increase contrast to the output image or adjust
the brightness of the output image.
Saturation: Up-down control for Saturation adjustment
Brightness: Up-down control for Brightness adjustment
Gamma: Up-down control for gamma adjustment
Preset value: Reset the corrected graph to default
8
When the "Device Setup dialog box is closed, a port specification prompt is
displayed. Specify a port accordingly.
1.1 ADI Installation
5
Advertisement
Table of Contents
