Procedure For Installation - Chamberlain MIRACLE-1 Elite Series Installation Instructions Manual

Procedure For Installation

STEP8: LOCK THE OPERATOR BY TURNING KEY -
F - TO THE VERTICAL POSITION WHILE PUSHING
OR PULLING ON THE GATE UNTIL YOU HEAR
THE KEY RELEASE CLICK INTO PLACE.
STEP 10:
DISTANCE WITH THE OUTSIDE
LIMIT SWITCH OF EACH SET.
8
F
ADJUST THE TRAVELING
Outside
Switch
Inside
Switches
(cont.)
STEP 9:
CARRY OUT ALL APPRO-
PRIATE CONNECTIONS IN THE
FOLLOWING PAGES OF THE MAN-
UAL TO POWER THE UNIT. THEN
GO TO STEP 10.
Outside
Switch
STEP 11: RE-INSTALL THE COVER.
(REFER TO STEP 1)