Bitwriter - Clifford 1.2 Installation Manual

➤ Bitwriter

®
The Bitwriter®
These features and the adjustments that may be programmed are described in
the table that follows.
Note: Feature programming for Responder LC remote controls with a display
screen are available when using the Bitwriter, however these features do not
apply to this system.
Feature
Aux/ trunk icon type
Aux 1 timed output
Aux 2 timed output
Aux 3 timed output
Diesel start timer
Timer mode run time
Timer mode starts
Timer mode intervals
Smart start low temp
Smart start high temp
Smart start low battery
Tach mode starter
release
Virtual tach fine tune
54
has the ability to fine tune certain features of the system.
Default
setting
Trunk
30 seconds
30 seconds
30 seconds
15 seconds
12 minutes
6 starts
3 hours
0 (F)
100 (F)
10.5 volts
10 (normal)
Not initialized
Optional settings
Window, sunroof, audio, lights, left slider
dr, right slider dr, rear hatch.
1-90 seconds
1-90 seconds
1-90 seconds
1-90 seconds
1-16 minutes
1/2/3/4/6/8/10/12/14/16/
1820/22/24 (Starts)
1/2/3/4/6/8/10/12/14/16/
18/20/22/24 (Hours)
OFF/-20/-10/0/10/20/30/40/50
/60/70 (F)
OFF/40/50/60/70/80/90/100/
110/120/130 (F)
OFF/12.5/12/11.5/11/10.5/10/
9.5/9 volts
0/1/2/3/4/5/6/7/8/9/10/11/1
2/13/14/15/16/17/18/19/20
0 - 1 second in 50mS increments
© 2008 Directed Electronics. All rights reserved.