Primary Harness (H1), 12-Pin Connector; Auxiliary Harness (H2), 7-Pin Connector - Clifford 1.2 Installation Manual

➤ Primary harness (H1), 12-pin connector

H1/1 RED/WHITE
H1/2 RED
H1/3 BROWN
H1/4 WHITE/BROWN
H1/5 BLACK
H1/6 VIOLET
H1/7 BLUE
H1/8 GREEN
H1/9 BLACK/WHITE
H1/10 WHITE/BLUE
H1/11 WHITE
H1/12 ORANGE
*Door trigger input is needed if one of the following are used: MTS, passive
arming, auto re-locking, door ajar error honk or Smart Key control.
**Not available with 1- way remote

➤ Auxiliary harness (H2), 7-pin connector

H2/1 LIGHT GREEN/
BLACK
H2/2 LIGHT GREEN/
WHITE
H2/3 WHITE/VIOLET
H2/4 VIOLET/BLACK
H2/5 WHITE/BLACK
H2/6 LIGHT BLUE
H2/7 GRAY/BLACK
© 2008 Directed Electronics. All rights reserved.
(-) 200mA TRUNK RELEASE OUTPUT
(+)12v CONSTANT INPUT
(-) HORN OUTPUT
LIGHT FLASH ISOLATION WIRE - PIN 87a of onboard relay
(-) CHASSIS GROUND
(+) DOOR TRIGGER INPUT*
(-) FACTORY HORN INPUT**
(-) DOOR TRIGGER INPUT*
(-) 200mA DOME LIGHT OUTPUT
(-) REMOTE START/ TURBO TIMER ACTIVATION INPUT
PARKING LIGHT OUTPUT
(-) 500mA GROUND WHEN ARMED OUTPUT
(-) 200mA FACTORY ALARM DISARM OUTPUT
(-) 200mA FACTORY ALARM ARM OUTPUT
(-) 200mA AUX 1 OUTPUT
(-) 200mA AUX 2 OUTPUT
(-) 200mA AUX 3 OUTPUT
(-) 200mA 2ND UNLOCK OUTPUT
(-) DIESEL WAIT TO START INPUT
11