Printing A Status Sheet; Using The Reserve Job Function - Epson Aculaser C2800 Series User Manual

Printing a status sheet

To confirm the current status of the printer, print a status sheet from the printer driver. The status
sheet contains information about the printer and its current settings.
Follow the steps below to print a status sheet.
1. Access the printer driver.
2. Click the Optional Settings tab and then click Status Sheet. The printer starts printing a
status sheet.

Using the Reserve Job Function

The Reserve Job function allows you to store print jobs on the printer's memory and to print them
later directly from the printer's control panel. Follow the instructions in this section to use the
Reserve Job function.
Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable RAM disk,
you have to set the RAM Disk setting on the control panel to Normal or Maximum. We recommend installing
an optional memory to use this function. For instructions about increasing your printer's memory, see
"Installing a memory module" on page 196. After installed the memory module, you have to update the
information about options. See "Making Optional Settings" on page 71.
The table below gives an overview of the Reserve Job options. Each option is described in detail
later in this section.
Reserve Job Option
Re-Print Job
Verify Job
Confidential Job
Downloaded from ManualsPrinter.com Manuals
Description
Lets you print the job now and store it for later reprinting.
Lets you print one copy now to verify the content before printing multiple
copies.
Lets you apply a password to the print job and save it for later printing.
Using the Printer Software with Windows
AcuLaser C2800 Series User's Guide
72