Epson Aculaser C2800 Series User Manual page 162

AcuLaser C2800 Series User's Guide
Height
Specifies the default font height if the font is scalable and proportional. You can select from 4.00 to
999.75 points, in 0.25-point increments. This item may not appear depending on the Font Source
or Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in Font Source and Font Number is not
available in the new SymSet setting, the Font Source and the Font Number settings are
automatically replaced with the default value, IBM-US.
Form
Selects the number of lines for the selected paper size and orientation. This also causes a line
spacing (VMI) change, and the new VMI value is stored in the printer. This means that later
changes in the Page Size or Orientation settings cause changes in the Form value, based on the
stored VMI.
CR Function, LF Function
These functions are included for users of particular operating systems, such as UNIX.
Tray Assign
Changes the assignment for the paper source select command. When 4 is selected, the commands
are set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as
compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands are set
as compatible with the HP LaserJet 5S.
Using the Control Panel 162
Downloaded from ManualsPrinter.com Manuals