Epson Aculaser C2800 Series User Manual page 232

2. Gently pull out any sheets of paper on the transfer unit.
Caution:
c
❏ Be careful not to damage the transfer belt.
❏ Do not touch the transfer belt and light-sensitive drums to avoid damaging them.
3. Raise the outer green knobs on the fuser unit to open the paper path.
Warning:
w
Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the
surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very
hot. If you must touch one of these areas, wait 30 minutes to allow the heat to subside before doing
so.
Downloaded from ManualsPrinter.com Manuals
AcuLaser C2800 Series
Troubleshooting
User's Guide
232