Epson Color Laser Transparencies - Epson Aculaser C2800 Series User Manual

EPSON Color Laser Transparencies

Epson recommends the use of EPSON Color Laser Transparencies.
Note:
❏ Duplex printing is not available for transparencies.
❏ When printing on transparencies, you cannot set the print quality to Maximum.
Transparencies can be loaded into the MP tray only. When using transparencies, you should make
paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
Paper Source:
Paper Type:
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray Menu" on
page 150.
❏ When the Paper Type setting in the printer driver is set to Transparency, do not load any other
type of paper except transparencies.
Please note the following when handling this media:
❏ Hold each sheet by its edges, as oil from your fingers may transfer to the surface and damage
the printable surface of the sheet. The Epson logo appears on the printable side.
❏ When loading transparencies in the MP tray, insert the short edge first as shown below.
Downloaded from ManualsPrinter.com Manuals
A4 or LT
MP Tray (up to 75 sheets or 15 mm thick stack)
Transparency
AcuLaser C2800 Series
Paper Handling
User's Guide
43