Carpet Spikes; Speaker Wire - Induction Dynamics S1.8TD Owner's Manual

Carpet Spikes

Carpet spikes are not required with the S1.8Td. However, they have been provided if you
would prefer to use them. Should you choose to do so, lay the S1.8Td on its back side, then
screw the carpet spikes into the threaded holes under the base of each speaker.

Speaker Wire

Use approved wire designed for in-wall or exposed use, as appropriate for your installation.
For the S1.8Td, we recommend using high-quality speaker wire that is 14 gauge or lower,
with easily visible polarity coding to make your connections. The following chart identifies
minimum gauge requirements for various lengths. See your local dealer or installation
contractor for more information.
WIRE LENGTHS / MINIMUM GAUGE REQUIREMENTS
Length (in feet)
up to 18'
up to 29'
up to 61'
AWG size and stranding
14 gauge (19/27)
12 gauge (65/30)
10 gauge (105/30)
4