To login into the VIA Connect PRO client when basic moderator mode is
activated:
1. Open the VIA Connect PRO client and enter the location (IP address of the
VIA Connect PRO gateway).
2. Enter the nickname.
The Room Code field appears.
3. Enter the room code (if Room Code is activated).
4. Click on Login.
If you're the first to login, you are the default moderator.
5. Click on "Leave Moderation" anytime to stop moderating the session.
Anyone else can now click on "Become Moderator" to access this privilege.
4.7.7
Mirroring Settings
By default, the iOS mirroring is enabled and the settings are shown as in the
following example:
VIA Connect PRO - Using VIA Connect PRO
37
Need help?
Do you have a question about the VIA CONNECT PRO and is the answer not in the manual?