Table of Contents
Advertisement
2.6.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Realtek LAN Controller [On]
[On]
[Off]
Realtek PXE Option ROM [Off]
This item appears only when you set the previous item to [On] and allows you to enable or
disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [On] [Off]
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [On]
Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [On] and allows you to select
the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h;
IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.8
APM Configuration
Deep S4 [Disabled]
When the system enters the S4 state and this item is set to [Enabled], the system will be put
to deep S4 sleep state to reduce power consumption. The system in deep S4 state can only
be woken up via the power button. Configuration options: [Disabled] [Enabled]
2-34
Enables the HD Audio Device.
Disables the HD Audio Device.
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets to an SPDIF audio output.
Sets to an HDMI audio output.
Enables the Realtek LAN controller.
Disables the controller.
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
