Internal Connectors - Asus Z170-P D3 User Manual

1.7.2

Internal connectors

1. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
Z170-P D3
Z170-P D3 Serial port (COM) connector
The COM module is purchased separately.
2. USB 2.0 connectors (10-1 pin USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
Z170-P D3
Z170-P D3 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
ASUS Z170-P D3
PIN 1
USB1112 USB1314
PIN 1 PIN 1
COM
1-15