Usb Configuration - Asus Z170-P D3 User Manual

SATA6G_3~6 (Gray) [Enabled]
Allow you to enable/disable the SATA6G_3~6 port. Configuration options: [Disabled]
[Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
2.6.6

USB Configuration

The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Your system supports the USB devices in legacy operating systems.
[Disabled] Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an XHCI hand-off
feature.
[Disabled] Disables the XHCI Hand-off support.
USB Single Port Control
USB_9/10/11/12/13/14 [Enabled]
Allows you to enable/disable USB_9/10/11/12/13/14 port. Configuration options:
[Disabled] [Enabled]
USB3_1/2/3/4/5/6/7/8 [Enabled]
Allows you to enable/disable USB3_1/2/3/4/5/6/7/8 port. Configuration options:
[Disabled] [Enabled]
ASUS Z170-P D3 2-33