Auto Power Off - Sony FDR-X1000V How To Use Manual

If you change the setting of the USB power supply while the micro USB cable is connected,
disconnect the cable, then reconnect.
Power may not be supplied properly from a USB device with a power supply capacity of less than 1.5
A.
If you turn the power of the camera on while charging the battery pack, charging stops and power is
supplied to the camera from a device connected via USB.
You can shoot and playback images using USB Power supply, however the battery pack is not
charged simultaneously.
How to supply power from a wall outlet (wall socket)
Use the USB charger AC-UD10 (sold separately). To connect the camera to the charger, use the micro USB
cable (supplied).
[50] How to use

Auto power off

You can change the setting of the auto power off function.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [A.OFF], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
20sec: Turns the power off after about 20 seconds.
60sec: Turns the power off after about 60 seconds.
OFF: Does not turn off automatically.
BACK: Returns to the [A.OFF] menu.
Note
Auto power off is not available in the following situations.
When recording data to media
Changing the Settings Camera settings