Connecting Multiple Cameras To Live-View Remote (Multi Connection) - Sony FDR-X1000V How To Use Manual

Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi] - [ON], then press the
ENTER button.
3. Select the SSID that is printed on the sticker attached to Startup Guide.
4. When this camera beeps and [ACPT?] is displayed on the display panel of this camera, press the
ENTER button of this camera.
Note
When [BEEP] is set to [OFF], the connection beep does not sound.
[73] How to use
the Live-View Remote
Connecting multiple cameras to Live-View Remote (Multi
connection)
1. Turn on the Live-View Remote.
For details, refer to "Connecting this unit to multiple cameras via Wi-Fi" in the Help Guide of the Live-
View Remote (RM-LVR2).
http://rd1.sony.net/help/cam/1530/h_zz/
2. Set the camera.
When you connect the camera to Live-View Remote for the first time
Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi] - [MULTI] - [NEW],
then press the ENTER button.
When this camera beeps and [AWAIT] is displayed on the display panel of this camera, register
this camera using the Live-View Remote.
[DONE] appears on the display panel of this camera when connecting finishes.
When you connect the camera to Live-View Remote since second time
Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi] - [MULTI] -
[CRRNT], then press the ENTER button.
3. If you will continue to connect multiple cameras, repeat from step 2.
Note
When [BEEP] is set to [OFF], the connection beep does not sound.
[74] How to use
Handycam
Connecting a single camera to Handycam (Single
Using the camera connected to other devices via Wi-Fi
Using the camera connected to other devices via Wi-Fi
Connecting to
Connecting to