Sony FDR-X1000V How To Use Manual page 53

About user bit
User bit is a function that can record information (8-digit hexadecimal numbers) such as date/time/scene
number. This function is useful for editing movies created using two or more cameras.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [TC/UB], then press the
ENTER button.
2. Press the NEXT button or PREV button to select [DISP], [TCSET] or [UBSET], then press the ENTER
button.
When selecting [DISP]
TC: Displays the time code.
U-BIT: Displays the user bit.
OFF: Does not display the time code/user bit.
When selecting [TCSET]
PrSet: Sets the time code.
Set four 2-digit numbers, then press the ENTER button.
The time code can be selected within the following range.
When selecting 30p or 60p
00:00:00:00 - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 - 23:59:59:24
When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4, between 0
and 23.
RESET: Initializes the time code.