Color Mode - Sony FDR-X1000V How To Use Manual

C.SET: Acquires the base white color for shooting under the light source.
Place a white reference object under the same lighting conditions as the subject and press the
REC/ENTER button.
BACK: Returns to the [WB] menu.
Note
If you set [SCENE] to [WATER], you cannot set the white balance.
[31] How to use
AE shift
You can adjust the exposure according to your preference.
1. Press the NEXT button or PREV button to select [SETUP] - [AESFT], then press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
0.0: Does not use the AE shift.
+0.3: Uses the AE shift (Set +0.3EV for example).
Select the preset value on this unit, then press the ENTER button.
BACK: Returns to the [AESFT] menu.
[32] How to use

Color mode

Changing the Settings
Changing the Settings
Shooting settings
Shooting settings