Auto Power Off - Sony HDR-AZ1 How To Use Manual

Note
When you change the settings by remote control, the camera and remote control will be
disconnected and the camera will restart automatically. When the restart of the camera is
completed, the remote control and the camera will be automatically connected.
Recording media formatted or recorded in NTSC (PAL) cannot be recorded or played in
PAL (NTSC). After switching the NTSC/PAL setting, format the current recording media or
use another recording media.
[57] How to Use
Settings

Auto Power Off

You can change the auto power off setting of the camera.
1. Press the MENU button of the remote control
2. Press the UP button or DOWN button of the remote control to select
power off) in
the remote control
3. Press the UP button or DOWN button of the remote control to select the desired setting
value, then press the REC/ENTER button of the remote control
(default): Turns the power of the camera off after about 60 seconds
: Does not use the auto power off function
Note
Auto power off is not available in the following situations.
Recording data to media
Shooting movies, or shooting in the interval photo recording mode
During movie playback or live streaming
Wi-Fi connection is in process, Wi-Fi remote control is connected, or an Image is being uploaded
to a smartphone
Connecting to a mass storage device
When the remote control is not connected to the camera through Wi-Fi, the camera
settings cannot be changed.
To return to the setting item selection screen from the setting value selection screen,
select .
To perform the setting item in the selection screen or the setting value, select
Changing the Settings of the Live-View Remote
(Connecting devices settings), then press the REC/ENTER button of
Connecting Devices
(Auto
.